Highlight:
Customized hemodialysis dialysis water treatment system
, ODM hemodialysis dialysis water treatment system
, 5000Dal Endotoxin Filter
Customized Hemodialysis Dialysis Water Treatment System Endotoxin Filter Module
Endotoxin Filter Module For Ultrapure Water Production
Our advanced endotoxin removal filter modules are designed to deliver ultrapure water of exceptional quality. With a molecular weight cutoff of up to 5000 daltons, the module ensures removal of contaminants and delivers water of unparalleled purity.
Main features:
Molecular Weight Cutoff (MWCO):
Achieve excellent molecular weight cutoff within 5000 Daltons, effectively filtering out impurities and large molecules.
Colony Forming Units (CFU) Control:
Ensure that the produced water has an extremely low microbial load, with total bacterial counts remaining below 10 CFU/ml.
Endotoxin levels:
Ensuring strict endotoxin control, levels remain below 0.03 EU/ml, exceeding industry standards for ultrapure water.
Product advantages:
Precision filtration:
This endotoxin filter in dialysis uses cutting-edge technology for precise filtration, removing contaminants at the molecular level.
Quality assurance:
Strict quality control measures are taken to ensure that produced water meets and exceeds regulatory requirements.
Versatility:
Suitable for a variety of applications including pharmaceutical, biotech and laboratory use where water purity is critical.
Easy integration:
Designed for seamless integration into water purification systems, making it a convenient and essential component of any advanced water treatment installation.
Hot water disinfection has many advantages over chemical disinfection methods:
First, there are no chemical disinfectants, no residual problems, high safety, short disinfection time, and a large amount of reverse osmosis water used for flushing disinfectants is saved, and the disinfection process can It is done automatically and no one is required to wait. Thermal disinfection combined with chemical disinfection is conducive to optimal water disinfection of water treatment equipment in hemodialysis water production equipment.
The effect of the hot water disinfection system depends on the heating temperature and heating rate. Once the temperature and heating rate do not meet the disinfection requirements, the disinfection effect will be greatly reduced, and hot water disinfection cannot remove the biofilm that has been produced.
At present, the pipeline disinfection method of dialysis water is gradually developing from chemical disinfection to hot water disinfection. Based on the advantages and disadvantages of hot water disinfection and chemical disinfection, in actual operation, we generally use a combination of hot water disinfection and chemical disinfection methods. , thermal disinfection is performed once a month, and chemical disinfection is performed every three months. During the chemical disinfection process, the residue of peracetic acid is strictly tested. After reaching the residue standard, the flushing time is extended for more than 2 hours to ensure that the residue reaches the minimum value.
After adopting the above disinfection method, in multiple water quality and microbial tests conducted within half a year, the results of the total number of bacteria and bacterial endotoxins were all at minimum values. For dialysis treatment, better microbial control will definitely bring better dialysis treatment effects, and it will certainly provide higher academic value for dialysis treatment in terms of prolonging patients' lives and improving patients' quality of life.
Parameters:
| Product model |
CJ-NDS-(2000-4000) |
| Host size |
500mm 900mm 1700mm |
| Water inlet requirement |
Qualified pure water for hemodialysis |
| Bacterial count index |
Less than 5 colonies per milliliter |
| Operating temperature |
1 ℃ to 40 ℃ |
| PH value |
1 ~ 14 |
| Endotoxin index |
Less than 0.001 EU/ml |
| Particle size |
Less than 10 microns |
| Turbidity |
Less than 4 NTU |
| Drainage condition |
Floor drain with unobstructed drainage |
| Reference standard (bacterial count) |
Less than 100 colonies per milliliter, with an intervention level of 50% of the maximum allowable level (according to YY0572-2015 standard) |
| Reference standard (endotoxin) |
Less than 0.25 EU/ml, intervention level is 50% of the maximum allowable level (according to YY0572-2015 standard) |
Tips
1. Raw water quality
Water inlet requirements: conductivity ≤ 400μs/cm, pressure 0.15-0.35Mpa, (conductivity > 400μs/cm requires the installation of a water softener. If the water pressure is too high, a pressure reducing valve can be installed) Raw water will affect the life cycle of consumables. When the raw water quality reaches the standard, the recommended replacement period for consumables is 6-12 months.
2. Demand water quality indicators
It complies with YY0572-2015 industry mandatory standards and American AAMI/ASAIO hemodialysis water standards.
3. The amount of water production you need
If you don’t know how much water the machine requires, you can choose the corresponding model based on the actual number of beds.
Company Profile and Certification:
Sichuan Pure Science and Technology Co., Ltd. is one of the famous laboratory & medical-grade water treatment systems brands and manufacturers in China. We have focused on water treatment for nearly 20 years, with clients from over 20 countries, covering hundreds of industries. We focus on laboratory & medical-grade water systems. Our Water Systems are designed to meet or exceed the Type I, II, and III reagent-grade water platforms set forth by CAP/NCCLS or ASTM standards. for hospitals, research facilities, manufacturing, cosmetics, food service, and other applications. Till now, we already know in the market for our Excellent Industrial design and it is easy to use product design. We also have a modern standard factory area of about 3000 square meters and Chengdu marketing headquarters. There is a group of long-term engaged in water treatment technology research and development team, rich practical experience of after-sales engineers, with a number of patents.
Why Choose Us?
Perfect service and after-sale measures
Based on our years of experience in water treatment equipment manufacturing sales, we know that only for customers to provide quality products is not enough, so we work hard for customers and dealers, to provide complete and perfect after-sale technical support, as long as you have needs, you can through a variety of ways, in a timely manner to contact us, to get the support you need !
Your message must be between 20-3,000 characters!
